VEVOR Hand Plate Shear 12″,Manual Metal Cutter Cutting Thickness1/4 Inch Max,Metal Steel Frame Snip Machine Benchtop 1/2 Inch Rod,for Shear Carbon Steel Plates and Bars
Original price was: $125.99.$119.99Current price is: $119.99.
Hand Plate Shear 12″,Manual Metal Cutter Cutting Thickness1/4 Inch Max,Metal Steel Frame Snip Machine Benchtop 1/2 Inch Rod,for Shear Carbon Steel Plates and Bars
【SHEAR CAPACITY】-This 12″ hand plate shear is designed to cut 1/4″ sheet steel, 2-3/4″ x 1/4″ flat steel and 1/2″ rod steel
【CHOSEN MATERIAL】-Solid steel frame metal shear ensures safety. Blades made of high carbon steel for long-term usage
【LONG HANDLE】-The metal shear cutter is equipped with a long lever arm with compensating spring for maximum leverage, saves effort efficiently
【FLEXIBLE USAGE】-This manual shear can also be fixed onto a workbench, thus making cutting process smooth and easy
【STABLE OPERATION】-Compact metal frame provides stability. Adjustable clamp inside this metal shear ensures easy adjustment and operation
13 reviews for VEVOR Hand Plate Shear 12″,Manual Metal Cutter Cutting Thickness1/4 Inch Max,Metal Steel Frame Snip Machine Benchtop 1/2 Inch Rod,for Shear Carbon Steel Plates and Bars
Add a review
Related Products
DEWALT 20V MAX XR Cut Off Tool, Brushless and Compact, Bare Tool Only (DCS438B)
DEWALT 20V Max Cordless Drill/Driver Kit, 2 Batteries and Charger Included (DCD771C2)
DEWALT 20V MAX Circular Saw, 6-1/2-Inch Blade, 460 MWO Engine, 0-50 Degree Bevel Capability, Bare Tool Only (DCS391B)
HARDELL Mini Cordless Rotary Tool Kit, 5-Speed and USB Charging with 61 Accessories, Multi-Purpose 3.7V Power Rotary Tool for Sanding, Polishing, Drilling, Etching, Engraving, DIY Crafts
Original price was: $125.99.$119.99Current price is: $119.99.
Amazon Customer #4 –
It totally works on appropriate material.
Heavy. That’s good. I have been cutting up old Disson handsaw blades that are somewhat hardened. This cutter cuts them cleanly without much distortion. In the past I’ve used everything from an angle grinder, to a band saw, to heavy-duty snips and I’ve hated the cuts from all of these tools. This thing cuts really well and with minimal effort. And… the best thing… it’s quiet. You don’t have to plug it in. You don’t need hearing protection or even a dust mask.In my experience it doesn’t cut really thin flashing material all that, but I could probably adjust the cutter heads to be a bit tighter. The thin stuff has a tendency to bend and get wedged between the block and the cutter head.Overall, I love this thing. It was a great purchase and it was crazy-inexpensive… with shipping!
Barry S. –
This shear is a beast
Heavy is an understatement. The shear weighs a lot but does a really nice job so far cutting 1/8 and 1/16 aluminum stock. Sorry I have not tried it on steel yet but with the ease this cuts aluminum I think it would cut steel almost as easy. Also found it has a 1/2″ rebar cutter built in.
Ron –
Great for cutting license plates
I have been looking for a way to cut license plates. Tried many options and none of them made an acceptable finished product. Is very heavy and the box that was left on my porch was broken. The tool was in good condition. So far the blade has held up well.
Casey’s Dad –
Works well within certain limits
Came with a wire edge on the anvil. Took it apart to dress it, but then it takes some work to reassemble because the blade is very tight against the anvil (that’s good). Will make a clean cut on paper and sheet metal up to about 1/8 in thick. Anything heavier I would limit to bar stock. Biggest drawback is that there’s no provision to get a square cut to the edge of a sheet.
michaelangelo –
Excellent Value for the Money – But check for any cracks before keeping
Shears are pretty simple tools, nonetheless this one is executed well. Assembly takes about five minutes (just several bolts to make the handle) and that’s about it.Tips:-like with all big cast iron tools, these ship with bolts not super tightened etc. to prevent cracking. So make sure the bolts are tight, it will help keep the cuts straight when using on thicker materiale.-Make sure to use the hold-down part (the black thing that holds the metal flat) – it will help keep the metal where it needs to be, and not allow it to “rise” and make the cut less straight.-Several smaller cuts are always better than one big one, if you can do such. also, cutting closer to the throat / inside will result in less deviation, depending on what you are cutting.Also, as with any standard tool check if there are any cracks in the cast iron. This is rare, but these boxes get thrown around a lot, and sometimes there might be a crack you might find after it’s too late.
ED CHECK –
Very nice
Works great,very sharp,cuts with ease.
Susan Webb –
Can’t use
Can not install the hold down plate due to bolt in the way. I have been in contact with Vevor for 3 weeks and keep getting the run around!
602Rockabilly –
Heavy! Lol.
I like this product. I bought the 12 inch version. It seems to be holding up very well cutting aluminum. The waste piece gets curled and that is my only complaint if you want to cut thin pieces to use… it would be nearly impossible unless you want to lose a finger Or waste the large piece of metal that you were cutting from. As I said earlier. The piece that comes out of the waste side will curl and then be unusable. Hopefully, that makes sense. It is a pretty good value as I have seen others that cost twice as much
Martin Sanchez D –
Es exactamente lo que esperaba, es un equipo robusto bien hecho.Lo necesito pata cortar pequeñas plaquitas de acero inoxidable y aluminio.lo recomiendo ampliamente.
Leonardo –
Cesoia / troncatrice di ottima qualità.
Mingjin lu –
Good
Rodrigo –
Es bastante sólido por lo que puedo confiar en su durbilidad, me llegó mucho antes de lo esperado, no creo que tenga algún defecto.
AD –
Das Element an sich wirkt sehr robust. Bei der Montage sind mir jedoch gleich mehrere Mängel aufgefallen:- angeschweißte Fußplatten sind verbogen- die Gewinde des Niederhalters sind so schlecht geschnitten, dass dieser sich kaum verstellen lässt- die Schneideklingen sind zum Teil blau lackiert.- der obere Teil des Hebels zum niederdrücken ist nur aufgesteckt, nicht befestigt.ärgerlich… Lieber ein paar Euro mehr verlangen und das Ganze dafür ordentlicher zu verarbeiten wäre sinnvoller gewesen.